User`s guide

Transparency Interleaving
4-38
4
Special Copying and Mail Box Features
Transparency Interleaving
When coping onto transparencies loaded into the stack bypass, this mode enables you to
automatically add interleaving sheet of paper between each sheet of transparency that is
output. The interleaf sheets protect the copied surface of the transparencies. You can also set to
copy the content of the transparencies onto interleaf sheets.
IMPORTANT
• The Transparency Interleaving mode cannot be used with the following mode(s).
- Copy: Remote or Cascade Copy, Finisher, Two-sided, Two-page Separation, Cover/Sheet Insertion,
Image Combination, Booklet, Image Repeat, Mirror Image, Form Composition, Tab Paper Creation,
Scan Image Check, Page/Copy Set Numbering, Watermark/Print Date
• Even if an optional finisher or Shift Tray-D1 is attached, you cannot use any of the Finisher modes with
the Transparency Interleaving mode.
• Only A4 or A4R is available for the Transparency Interleaving mode.
NOTE
• The Transparency Interleaving mode is available for the Copying function only.
• The machine's counter does not count blank interleaf sheets as copies.
■ If You Do Not Want to Print on the Interleaf Sheets:
The [Leave Blank] setting outputs a printed transparency and a blank interleaf sheet alternately.
Originals Copies
Transparencies
Blank Interleaf Sheets
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 38 Tuesday, May 24, 2005 12:12 PM