User`s guide

Frame Erase
4-61
4
Special Copying and Mail Box Features
IMPORTANT
• The Binding Erase mode cannot be used with the following mode(s).
- Copy: Entire Image, Book 2-Sided, Two-page Separation, Cover/Sheet Insertion (Tab Paper),
Booklet, Image Repeat, Mirror Image, Tab Paper Creation, Page/Copy Set Numbering, Watermark/
Print Date
- Mail Box: Two-page Separation, Booklet Scanning
• Do not place originals with binding holes in the feeder, as this may damage the originals.
• When using the Binding Erase mode, the borders you do not select are also erased by 4 mm.
NOTE
The procedure for storing documents in an inbox is the same as for copying.
1 On the Special Features screen, press [Frame Erase].
IMPORTANT
Place your original on the platen glass.
2 Press [Binding Erase] ➞ select the border where the binding holes are
located.
The border is where the binding holes are located on the original, if you visualize the original as
being face up.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 61 Tuesday, May 24, 2005 12:12 PM