User`s guide

Composing Images
4-82
4
Special Copying and Mail Box Features
IMPORTANT
• The Form Composition mode cannot be used with the following mode(s).
- Copy: Remote Copy, Saddle Stitch, Cover/Sheet Insertion, Image Combination, Booklet,
Transparency Interleaving, Image Repeat, Scan Image Check, Page/Copy Set Numbering,
Watermark/Print Date
- Mail Box: Saddle Stitch, Cover/Sheet Insertion, Cover/Job Separator, Booklet, Page/Copy Set
Numbering, Watermark/Print Date
• If you use the Form Composition mode with the Cascade Copy mode, it is necessary to assign the
same name to the stored image form in both this machine and the remote copy printer beforehand. If
the assigned image form name in this machine is not set in the remote copy printer, the job is canceled.
If multiple image forms with the same assigned name are stored in the remote copy printer, different
image may be used for Form Composition.
• To use the Form Composition mode, the image form must be stored in the machine beforehand. (See
Chapter 4, "Customizing Settings," in the Reference Guide.)
• Form composition can be used with other copy modes, which are not listed above, to process images.
However, copy modes other than the Shift and Mirror Image modes can only be used for copying
images, and not for stored image forms.
• Up to 100 image forms can be stored. However, this number varies depending on the free space of the
hard disk.
• The Form Composition mode can only be used with documents whose resolution is 600 x 600 dpi.
• Printing/Copying performance may not be optimal in the Form Composition mode, depending on the
selected document and image form.
NOTE
The procedure for printing documents from an inbox is the same as for copying.
1 On the Special Features screen, press [Form Composition].
2 Select the image form to be superimposed over the original ➞
press [OK].
When there are more than eight stored image forms, press [ ] or [ ] to display the other
images.
To combine images on both sides of a sheet, press [Back] ➞ select the desired image form.
• You can select different image forms for both the front and back sheets.
To check images stored as forms, press [Check Print] to print a sample of the image.
Press [Details] to display the detailed information of the image form.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 82 Tuesday, May 24, 2005 12:12 PM