User`s guide

Page and Copy Set Numbering
4-84
4
Special Copying and Mail Box Features
Page and Copy Set Numbering
This mode enables you to print page numbers, copy set numbers, and user-defined text onto
the output.
IMPORTANT
• The Page Numbering mode cannot be used with the following mode(s).
- Copy: Saddle Stitch, Entire Image, Shift (No. Key Entry), Transparency Interleaving, Frame Erase,
Mirror Image, Form Composition
- Mail Box: Saddle Stitch, Form Composition
• The Copy Set Numbering mode cannot be used with the following mode(s), in addition to the modes
mentioned above.
- Copy: Group, Rotate Group, Offset Group, Booklet
- Mail Box: Group, Rotate Group, Offset Group, Booklet
• For the Mail Box function, the Page/Copy Set Numbering mode cannot be used with documents whose
resolution is other than 600 x 600 dpi.
• Printing/Copying performance may not be optimal in the Page/Copy Set Numbering mode, depending
on the scanned original and combination of copy modes.
NOTE
• The procedure for printing documents from an inbox is the same for copying.
• You can also adjust the position of the page numbers. (See Chapter 4, "Customizing Settings," in the
Reference Guide.)
• If you select [Numbered Chapters] in combination with the Cover/Sheet Insertion (Sheet Insertion.
Chapter Page, or Tab Paper) mode or the Cover/Job Separator mode (for the Mail Box function), the
chapter numbers are counted as follows:
- Copy: After each chapter page or tab paper is inserted
After each sheet insertion (left blank) is inserted
- Mail Box: After each sheet is inserted
• If the Scan Image Check mode is used with the Copy Set Numbering mode, the number is copied as
"XXXXX."
• If the copy number has fewer than five digits, the machine copies it as follows:
- Example: If the copy number is 10, "00010" is printed.
• If the Page Numbering mode is used with the Cover/Sheet Insertion or Cover/Job Separator mode (for
the Mail Box function), page numbers are not printed on the inserted pages.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 84 Tuesday, May 24, 2005 12:12 PM