User`s guide

Page and Copy Set Numbering
4-88
4
Special Copying and Mail Box Features
● To specify the number of digits to be printed:
❑ Press [Num. of Digits (Attach 0 before Page Num.)] ➞ specify the number of digits by
pressing [-] or [+].
NOTE
• The number of digits you can specify is '2' to '5'.
• If the specified number of digits is less than the number of digits of the actual page number, the
setting is invalid.
● To add text:
❑ Press [Add Characters] ➞ [Next].
❑ Press [Enter] ➞ enter the text ➞ press [OK] ➞ [Next].
You can also select text which has been registered in the machine beforehand.
You can enter up to 32 characters.
NOTE
• For instructions on entering characters, see Chapter 2, "Basic Operations," in the Reference
Guide.
• The Register button is a short cut key to the Register characters for Page No./Watermark screen
in Common Settings (from the Additional Functions screen).
❑ Set the position of the text ➞ press [Next].
- Example: If the page number is 10 and number of digits is 2, "10" is printed.
If the page number is 10 and number of digits is 5, "00010" is printed.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 88 Tuesday, May 24, 2005 12:12 PM