User`s guide

Tab Paper Creation
4-99
4
Special Copying and Mail Box Features
IMPORTANT
• The Tab Paper Creation mode cannot be used with the following mode(s).
- Copy: Automatic Paper Selection, Auto Zoom, Zoom Program, XY Zoom (Auto XY Zoom), Entire
Image, Group, Offset Group, Rotate Collate, Rotate Group, Staple (Top Right Corner, Bottom Right
Corner, or Right Double), Saddle Stitch, 1 2-Sided, 2 2-Sided, Book 2-Sided, Two-page
Separation, Cover/Sheet Insertion, Image Combination, Shift, Booklet, Transparency Interleaving,
Margin, Frame Erase, Image Repeat
- Mail Box: Automatic Paper Selection, Group, Offset Group, Rotate Collate, Rotate Group, Staple (Top
Right Corner, Bottom Right Corner, or Right Double), Saddle Stitch, Cover/Sheet Insertion, Cover/Job
Separator, Two-Sided, Booklet, Margin
• Only A4 originals can be used with the Tab Paper Creation mode.
NOTE
• The procedure for printing documents from an inbox is the same for copying.
• When making copies on the tab paper, check that the tab position is correct and set from the top page.
• To create tab papers, it is necessary to store the type of paper for Paper Drawer 3 or 4 in Common
Settings from the Additional Functions screen. (See Chapter 4, "Customizing Settings," in the
Reference Guide.)
• For instructions on how to load tab paper in a Paper Drawer 3 or 4, see Chapter 7, "Routine
Maintenance," in the Reference Guide.
• Images in the area which is to be shifted, but not within the tab area may cause the copies to have black
streaks or appear as dirty.
ABC
Example: Images may be copied onto other parts of the tab paper.
Area to be Shifted
ABC
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 99 Tuesday, May 24, 2005 12:12 PM