User`s guide

Tab Paper Creation
4-101
4
Special Copying and Mail Box Features
NOTE
• Make sure that the Number of Tabs shown on the Tab Paper Creation Copy Shift Width Settings
screen is the same as the number of tabs on the tab paper set in the paper drawer.
• If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See Chapter 4, "Customizing Settings," in the Reference
Guide.)
• The default setting is '13 mm'. You can specify up to '25 mm'.
• You can change the number of tabs in Store Paper Type from the Additional Functions screen.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)
4 Press [Done].
The display returns to the Regular Copy Basic Features screen.
5 Press .
Copying starts.
NOTE
• To cancel this setting, press [Special Features] ➞ [ ▼ ] ➞ [Tab Paper Creation] ➞ [Cancel] in this
order.
• To cancel all settings and return the machine to the Standard mode, press .
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 101 Tuesday, May 24, 2005 12:12 PM