User`s guide
Memory Keys
5-6
5
Memory Features
● If you select a key that already has settings stored in it:
❑ A screen appears, asking for your confirmation to overwrite the previous settings. Press
[Yes].
To cancel overwriting the settings, press [No].
The message <Stored in memory.> appears for approximately two seconds on the touch
panel display.
The stored settings are displayed.
4
Press [Cancel].
NOTE
You can assign a name to the memory key by pressing [Register Name].
Naming a Memory Key
1
On the Special Features screen, press [Mode Memory].
2
Select a key ([M1] to [M9]) to name ➞ press [Register Name].
NOTE
•
Keys that already have settings stored in them are displayed with a coloured triangle ( ) in the
lower right corner of the key.
•
If you select a key that already has settings stored in it, the settings are displayed.
•
You can also name keys with no settings stored in them.
•
If there are more stored copy settings than are currently displayed, you can scroll through the list
by pressing [ ] or [ ].
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 6 Tuesday, May 24, 2005 12:12 PM