User`s guide

Selecting an Output Device (Select Output Device)
1-22
1
Introduction to the Copy Functions
Selecting a Printing Destination; Giving Priority to the
Copy Mode
Use this procedure for selecting copy settings before selecting a remote copying device.
You can select only a remote copy printer that supports the selected copy settings.
1 Place your originals ➞ set the desired copy modes ➞ press
[Select Output Device].
This machine and the registered remote copy printers are displayed.
NOTE
This machine appears at the top of the output device select list.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 22 Tuesday, May 24, 2005 12:12 PM