User`s guide

Making a Copy With the Express Copy Basic Features Screen

7-20

Using the Express Copy Basic Features Screen

● If you select stack bypass settings:

❑ Press [All].

❑ Press [Stack Bypass Settings].

❑ Select the paper size ➞ press [Next].

IMPORTANT

•

When printing on special types of paper, such as heavy paper or transparencies, be sure to

correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set

correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become

dirty, or the paper could jam, and a service repair may be needed.

•

The nonstandard size paper cannot be used with the Auto Zoom, Entire Image, Finisher, 1

2-Sided, 2 2-Sided, Book 2-Sided, Two-page Separation, Front Cover/Back Cover, Paper

Insertion, Image Combination, Shift, Booklet, Transparency Interleaving, Image Repeat, Form

Composition, Page Numbering/Copy Set Numbering, Watermark/Print Date, or Tab Paper

Creation mode.

NOTE

•

[Register] is a short cut key to the Register Paper Type in Common Settings from the Additional

Functions screen.

•

To select an inch paper size, press [Inch-size].

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 20 Tuesday, May 24, 2005 12:12 PM