User`s guide

Making a Copy With the Express Copy Basic Features Screen
7-31
7
Using the Express Copy Basic Features Screen
To specify whether the printed sheets are output face up or face down, press [Face Up/Face
Down] and select from the following:
Details of each item are shown below.
IMPORTANT
• The Hole Punch mode cannot be used with the Saddle Stitch, Transparency Interleaving, or
Booklet mode.
• [Rotate] can be selected only in the following cases:
- When the available paper size is selected manually
- When the available paper size is loaded in both the horizontal and vertical directions
- The selected paper source must have Drawer Eligibility For APS/ADS in Common Settings
(from the Additional Functions screen) set to 'On'. (See Chapter 4, "Customizing Settings," in
the Reference Guide.)
• If there is no paper which can be rotated, the output will be collated.
[Auto]: If you scan and print a single page original, or print on non-standard
sized paper or other available paper loaded in the stack bypass, the
printed sheets are output face up.
[Face Down (Normal)]: Printed sheets are always output face down.
[Face Up (Reverse)]: Printed sheets are always output face up.
Face Up/Face Down
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 31 Tuesday, May 24, 2005 12:12 PM