User`s guide

Making a Copy With the Express Copy Basic Features Screen
7-39
7
Using the Express Copy Basic Features Screen
Interrupting the Current Job to Make Priority Copies
(Interrupt Mode)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Interrupt
Mode," on p. 1-51.
IMPORTANT
The Interrupt mode cannot used with the Remote Copy or Cascade Copy mode.
1 Press [Interrupt].
If you want to make copies after changing the Department ID while Department ID
Management is enabled, press ➞ enter the Department ID and Password. (See Chapter 2,
"Basic Operations," in the Reference Guide.)
2 Place your originals ➞ select the desired copy modes.
Interrupt
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 39 Tuesday, May 24, 2005 12:12 PM