User`s guide

Making a Copy With the Express Copy Basic Features Screen

7-43

Using the Express Copy Basic Features Screen

Select either [1 Before], [2 Before], or [3 Before].

Registering Frequently Used Copy Settings in Memory

(Mode Memory)

For instructions on this procedure using the Regular Copy Basic Features screen, see

"StoringScan/Print/Copy Settings," on p. 5-4.

IMPORTANT

Even if a remote copy printer is registered in Mode Memory, if the main power of this machine or the

remote copy printer is turned OFF and ON again, the registered settings change to Local Printer. To use

the registered remote copy printer, confirm that the remote copy printer is ON, update the remote copy

printer information after the specified period that you set at the Startup Time Settings in Additional

Functions, and set the Mode Memory. (See Chapter 3, "Using a TCP/IP Network," in the Network Guide

or "Confirming a Remote Device," on p. 8-21.)

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 43 Tuesday, May 24, 2005 12:12 PM