User`s guide

Making a Copy with the Booklet, Shift Settings (Book/Page Edit/Shift)
7-66
7
Using the Express Copy Basic Features Screen
Making Copies for Use as a Booklet (Booklet)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Booklet
Mode," on p. 4-27.
IMPORTANT
• The Booklet mode cannot be used with the Stack Bypass Settings (2nd Side of 2-Sided Page), Entire
Image, Automatic Paper Selection, Finisher, Two-Sided, Two-page Separation, Front Cover/Back Cover,
Paper Insertion, Image Combination, Shift (No. Key Entry), Transparency Interleaving, Margin, Different
Size Originals, Frame Erase, Image Repeat, Mirror Image, Form Composition, Tab Paper Creation,
Scan Image Check, Page Numbering/Copy Set Numbering, or Watermark/Print Date mode.
• The Divided Booklet mode cannot be used together with the Remote or Cascade Copy mode, in
addition to the above-mentioned modes.
• Saddle stitching is not performed when there is only one sheet.
• Saddle stitching can be performed only if the optional Saddle Finisher-T2 is attached.
• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the paper type and the
number of sheets.
1 Press [Book/Page Edit/Shift].
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 66 Tuesday, May 24, 2005 12:12 PM