User`s guide

Making a Copy with the Image Combination and Frame Erase Modes (Process/Layout)
7-106
7
Using the Express Copy Basic Features Screen
NOTE
• If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See Chapter 4, "Customizing Settings," in the Reference
Guide.)
• For details on how to enter the values in inches, see Chapter 2, "Basic Operations," in the
Reference Guide.
4 Press [Done].
The display returns to the Express Copy Basic Features screen.
Making Copies by Erasing Binding Holes (Binding Erase)
IMPORTANT
• The Binding Erase mode cannot be used with the Entire Image, Book 2-Sided, Two-Page Separation,
Paper Insertion (Tab Paper), Booklet, Image Repeat, Mirror Image, Tab Paper Creation, Page
Numbering/Copy Set Numbering, or Watermark/Print Date mode.
• Do not place originals with binding holes in the feeder, as this may damage the originals.
• When using the Binding Erase mode, the borders you do not select are also erased by 4 mm.
1 Press [Process/Layout].
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 106 Tuesday, May 24, 2005 12:12 PM