User`s guide

Making a Copy with the Image Combination and Frame Erase Modes (Process/Layout)
7-107
7
Using the Express Copy Basic Features Screen
2 Press [Frame Erase].
3 Press [Binding Erase] ➞ designate the area of the binding holes on the
original.
The border is where the binding holes are located on the original, if you visualize the original as
being face up.
When entering values in millimetres, you can use - (numeric keys) and .
If you enter the value with-(numeric keys), you can change the entered value by pressing [-] or
[+].
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 107 Tuesday, May 24, 2005 12:12 PM