User`s guide

Customizing Copy Settings
8-16
8
Customizing Settings
2 Select [On] or [Off] ➞ press [OK].
The selected mode is set.
3 Press [Done] repeatedly until the Regular or Express Copy Basic
Features screen appears.
Auto Orientation
If Auto Orientation is set to 'On', the machine uses information, such as the size of the original
and the zoom ratio, to determine the most suitable orientation for the specified paper size and
automatically rotates the image, if necessary.
NOTE
The default setting is 'On'.
1 Press ➞ [Copy Settings] ➞ [Auto Orientation].
2 Select [On] or [Off] ➞ press [OK].
The selected mode is set.
NOTE
• If A4 or A5 originals are enlarged onto A3 copy paper, Auto Orientation is not performed even if
you select [On].
• Only the images of standard size originals, up to A4 paper, can be rotated when the copy ratio is
set to 100%.
• If Automatic Paper Selection is set and the most suitable paper size is not available, the paper
source that is loaded with paper of the same size, even if the orientation is different, is displayed
as the optimal paper to use.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 16 Tuesday, May 24, 2005 12:12 PM