User`s guide

Customizing Copy Settings
8-17
8
Customizing Settings
Setting the Photo Mode for the Copying Function
You can set whether or not to use the Photo mode for the Copying function. When Photo Mode
is set to 'On', you can select [Printed Image] or [Photo] from the Original Type drop-down list on
the Regular Copy Basic Features screen or directly from the Express Copy Basic Features
screen.
NOTE
The default setting is 'Off'.
1 Press ➞ [Copy Settings] ➞ [Photo Mode].
2 Select [On] or [Off] ➞ press [OK].
The selected mode is set.
Changing the Current Standard Settings
The Standard Settings refers to a combination of copy modes that the machine automatically
returns after the power is turned ON, or when is pressed.
The Standard Settings can be changed to suit your needs, or restored to their default settings.
IMPORTANT
Even if a remote copy printer is stored in Standard Settings, if the main power of this machine or the
remote copy printer is turned OFF and ON again, the stored settings change to Local Printer. To use the
stored remote copy printer as the Standard Setting, it is necessary to register the Standard Settings
again.
NOTE
The default settings are:
- Copy Quantity: 1
- Paper Selection: Auto
- Copy Exposure/Original Type: Auto
- Copy Ratio: 1:1
- Copy:1 1-Sided Copy
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 17 Tuesday, May 24, 2005 12:12 PM