User`s guide

Customizing Copy Settings
8-19
8
Customizing Settings
Initializing Standard Settings
You can restore the Standard Settings to their default settings.
1 Press ➞ [Copy Settings] ➞ [Standard Settings].
2 Press [Initialize].
3 Verify the settings ➞ press [Yes].
To cancel initializing the Standard Settings, press [No].
The message <Initialized.> appears for approximately two seconds on the touch panel display.
The Standard Settings are initialized.
4 Press [Done].
Specifying the Remote Copy Printer Settings
Details on printer names and IP addresses for remote copy printers can be confirmed, added,
or deleted. You can set up to seven remote copy printers on this machine.
NOTE
If you set Department IDs and Passwords for the registered remote copy printers, make sure their
settings are the same as this machine. (See Chapter 6, "System Manager Settings," in the Reference
Guide.)
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 19 Tuesday, May 24, 2005 12:12 PM