User`s guide

Customizing Copy Settings
8-23
8
Customizing Settings
Deleting a Remote Device
1 Press ➞ [Copy Settings] ➞ [▼] ➞ [Register Remote Device].
2 Select the remote copy printer that you want to delete ➞ press [Erase].
If the desired remote copy printer is not displayed, press [▼] and [▲] to scroll to the desired
remote copy printer.
NOTE
When you set the Remote or Cascade Copy mode, the remote copy printer cannot be deleted.
3 Press [Yes].
If you press [No], the remote copy printer is not erased.
The message <Erased.> appears for approximately two seconds on the touch panel display.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 23 Tuesday, May 24, 2005 12:12 PM