User`s guide

Customizing Copy Settings
8-24
8
Customizing Settings
4 Press [Done] repeatedly until the Regular or Express Copy Basic
Features screen appears.
Setting the Remote Device Transmission Timeout
A remote copy job is cancelled if there is no response from the remote copy printer within a
given time. Select a timeout setting from 5 to 30 seconds in 1-second increments.
NOTE
• Jobs that reach the timeout limit (without arriving at the remote copy printer) are deleted.
• The default timeout setting is '30 seconds'.
1 Press ➞ [Copy Settings] ➞ [▼] ➞ [Remote Device Transmission
Timeout].
2 Use [-] and [+] to set the Remote Device Transmission Timeout ➞
press [OK].
You can also enter values using - (numeric keys).
The selected mode is set.
3 Press [Done] repeatedly until the Regular or Express Copy Basic
Features screen appears.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 24 Tuesday, May 24, 2005 12:12 PM