User`s guide

Customizing Mail Box Settings

8-34

Customizing Settings

[Register Inbox Name]:

Press [Register Inbox Name] ➞ enter a name ➞ press [OK]. The maximum number of

characters that you can use for the Confidential Fax Inbox name is 24.

<Password>:

Press [Password], and enter the password for the Confidential Fax Inbox using - (numeric

keys) in seven digits or less. Press [Confirm], enter the same password, and press [OK]. You

can leave the password blank. You cannot store a password with only zeros as the number,

such as <000000>.

[URL Send Settings]:

To notify the URL by e-mail, press [URL Send Settings] ➞ select the destination ➞ press [OK].

The selected mode is set.

IMPORTANT

Since there is no way to check a stored password, make sure that you write down the password

that you enter, and keep it in a safe place.

NOTE

•

For instructions on entering characters, see Chapter 2, "Basic Operations," in the Reference

Guide.

•

If Use Asterisks to Enter Access No./Passwords in System Settings (from the Additional

Functions screen) is set to 'Off', passwords you enter are not displayed as asterisks (********).

(See Chapter 6, "System Manager Settings," in the Reference Guide.)

Press [Done].

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 34 Tuesday, May 24, 2005 12:12 PM