User`s guide

Interrupt Mode

1-51

Introduction to the Copy Functions

Interrupt Mode

This mode enables you to interrupt the current job or a reserved job to make priority copies.

This mode is useful if you need to make a rush copy during a long copy job.

IMPORTANT

If you select interrupt mode, you cannot use the Remote Copy or Cascade Copy mode.

NOTE

You can make interrupt copies whenever the machine is ready to scan.

Press [Interrupt].

If you want to make copies after changing the Department ID while Department ID

Management is enabled, press ➞ enter the Department ID and password using -

(numeric keys). (See Chapter 6, "System Manager Settings," in the Reference Guide.)

NOTE

The current job does not stop printing immediately after you press [Interrupt]. Printing of the

current job stops only when the actual printing of the priority or interrupt copy starts.

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 51 Tuesday, May 24, 2005 12:12 PM