Manualshelf

User`s guide

ManualsBrandsCanon ManualsFax Machine5570
61626364656667686970
Sample Set
1-53
1
Introduction to the Copy Functions
Sample Set
This mode enables you to check the copy result before making multiple copies.
IMPORTANT
•
[Sample Set] appears only if you set to make multiple copies of your original in the Collate, Offset
Collate, Rotate Collate, Staple, Cover/Sheet Insertion, Booklet, or Transparency Interleaving modes.
[Sample Set] does not appear if the Group mode is set.
•
The Sample Set cannot be used with the Remote Copy or Cascade Copy mode.
NOTE
The machine's counter counts the sample print as a print.
1
Place your originals ➞ set the desired copy modes.
2
Press [Sample Set] ➞ .
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display ➞ press once for each original. When scanning is complete, press [Done].
Copying starts and one sample set is output.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 53 Tuesday, May 24, 2005 12:12 PM