User`s guide

Sample Set
1-54
1
Introduction to the Copy Functions
3 Check the sample set ➞ select [Start Print], [Cancel],
or [Change Settings].
● To print the remaining prints:
❑ Press [Start Print].
● To cancel copying:
❑ Press [Cancel].
● To change the copy settings:
❑ Press [Change Settings] ➞ change the necessary settings ➞ press [Done].
To change the exposure, press [ ] or [ ].
To change the paper size, press [Paper Select].
To collate the copies, press [Finisher]. (See "Collating Copies/Prints," on p. 3-30.)
To make two-sided copies, press [2-Sided Copy].
To set a margin for binding, press [Margin]. (See "Margin Mode," on p. 4-51.)
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 54 Tuesday, May 24, 2005 12:12 PM