User`s guide

Confirming/Changing/Cancelling Selected Settings
1-57
1
Introduction to the Copy Functions
2 Check the settings.
If the desired modes are set, skip to step 4. Otherwise, press the key of the copy mode to be
changed or cancelled.
If 10 or more copy modes are set, press [ ] to display the next screen. To return to the previous
screen, press [ ].
The settings screen for the selected copy mode is displayed.
NOTE
A right triangle ( ) on a copy mode setting key indicates that more setting screens are available
by pressing the key.
3 Change or cancel the selected copy mode (for example, Sharpness).
● To change a copy mode:
❑ Perform the same steps used for setting the mode. Change the setting as you desire ➞
press [OK].
The display returns to the Setting Confirmation screen.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 57 Tuesday, May 24, 2005 12:12 PM