User`s guide
Flow of Mail Box Operations
2-18
2
Introduction to the Mail Box Functions
7
Specify the desired scan settings.
NOTE
•
To adjust scan exposure and select original type, see "Exposure and Original Type Settings,"
on p. 3-2.
•
To change zoom ratio, see "Changing the Copy (Zoom) Ratio," on p. 3-9.
•
To scan two-sided originals, see "Scanning Two-Sided Originals," on p. 3-65.
•
Additional scan settings are available by pressing [Special Features].
•
You can set various modes when scanning originals, similar to the Copy function.
•
If you want to give the document a name, press [Document Name].
● To specify a document name:
❑ Press [Document Name] ➞ enter a name for the document ➞ press [OK].
The maximum number of characters that you can enter for the document's name is 24.
NOTE
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the Reference
Guide.
•
If you scan a document without giving it a name, the machine automatically assigns the
document a name using the year, month, day, and time the document was scanned. For
example, if a document is created at 1:35 PM, 41 seconds, on January 15, 2005, its name will be
<20050115133541>.
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 18 Tuesday, May 24, 2005 12:12 PM