User Manual
Speedlite transmitter ST–E2
Speedlite transmitter ST–E3-RT
Small, lightweight and portable, the
ST–E2 is a dedicated infra-red transmitter
to control two groups of remote wireless
slave Speedlites. It also functions as a
focus assist lamp in low light.
• E–TTL II ash control
• Ratio control over two
groups of ashguns
• High-Speed sync
• Up to 10m range outdoors
• AF Assist beam
Speedlite bracket SB–E2
Shooting with a ash on-camera can produce very good results, however,
for more attering light it is best to position the ash off to one side of the
camera. With different levels of height adjustment you can modify the angle
from which the ash is red.
For those photographers making use of Speedlite ash in wedding or
event photography, the CP–E4 will reduce the frequency that batteries
need to be changed and will also increase the ash recycling speed,
reducing the time you have to wait between shots. It holds 8x AA
batteries ensuring you can keep shooting longer.
Off-camera shoe cord OC–E3
The OC–E3 allows you to retain a connection
to the camera while positioning the ash up
to 60 cm away.
With the ash off-camera you can control
where shadows fall and also minimise
red-eye in portraits.
Compact battery pack CP–E4
Accessories
14
Fire compatible Speedlite ashguns
over distances of up to 30m. Radio-
frequency control provides reliable
operation even when direct line of
sight is not possible.
• Radio frequency remote
ash trigger.
• Fire selected Speedlites
from 30m away.
• Controls up to 15 ashguns.
• Remote camera triggering.
• Weather sealed against dust
and moisture.