Camera Flash User Manual

~ FEB ,1iI1I"1 i;;;11 11'11;;;11 lllii! 1'11,;;11 U'iliiU111
II 1I1111111~1
You can take three flash shots while automatically changing the flash
output for each shot up to ±3 stops
in 1/3-stop increments (1/2-stop
increments if the camera enables only 1/2-stop increments). This is
called FEB (Flash Exposure Bracketing).
Select <~>.
Press the <@> button so that <~>
is displayed.
The
< ~ > icon and bracketing
amount will blink.
Set the flash exposure bracketing
amount.
• Turn the < @ > dial to set the amount.
Press the <@> button.
FEB will be set.
III • After the three shots are taken, FEB will be cancelled automatically.
For FEB, set the camera's drive mode to single shooting. Be sure the
flash is ready before shooting.
•
You can also combine FEB with flash exposure compensation and FE
lock.
[II'iI You can prevent the FEB from being cancelled automatically after the
three shots are taken. (C.Fn-03
~ p.27)
[II'iI The FEB shooting sequence can be changed. (C.Fn-04 ~ p.27)
15