Camera Flash User Manual

M: ManuaI FIash 1\1111111111111111111 1IlI1III1IlI1IlI1III1IlI1I11I11IlI1I11I1 11111
You can set the flash output from 1/128 power to 1/1 full power in 1/3-
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure.
M
til
II y
Zoom SDmm
Zoom SDmm
1 Press the <MODE> button so
, that
<M> is displayed.
Set the flash output.
Press the < @ > button.
•' The flash output blinks.
Turn the
< ~ > dial to set the flash
output, then press the
< @ > button.
Press the shutter button halfway to
see the effective flash range
displayed.
Flash Output Display
When you change the flash output during shooting, the table below
makes
it easier to see how the stop changes such as 1/2 -0.3 ~ 1 /2 ~
1/2 +0.3. You can see how the stop changes when you increase or
decrease the flash output.
For example, when you decrease the flash output to 1/2, 1/2 -0.3, or 1/2
-0.7, and then increase the flash output to more than 1/2, 1/2 +0.3, 1/2
+0.7, and
1/1 will be displayed.
<-- Figures for increased flash output
22