User Manual

Attaching to the Camera
Loosen the locking ring.
■ Turn the locking ring as shown by the arrow
to loosen it.
Attach it to the camera.
• Slip the Speedlite’s mounting loot all the
way into the hot shoe.
Tighten.
• Turn the locking ring as shown by the
arrow. The locking pin will protrude from
the mounting foot to further secure the
attachment.
• To detach the Speedlite, loosen the locking
ring until the locking pin disengages. Then
slip the Speedlite out of the hot shoe.
Wireless Selector Settings
I
The wireless selector is for switching between
normal fJash shooting and wireless Hash
shooting.
For normal flash shooting, be sure to set the
wireless selector to <OFFi‘.