User Manual

Bounce Flash

By poiming the flash head toward a waif or ceiling, the flash will bounce off

the surface before illuminating the subject. This can soften shadows behind

the subject for a more natural-looking shot. This is called bounce flash.

Set the Bounce Direction

Hold down the <PUSH> button and turn the flash head.

If the flash coverage is set automatically, the flash coverage will be set to

50mm.

The LCD panel will also display <- -> mm.

• You can also set the flash coverage manually,

W * it the wall or ceiling Is too tar away, the twunced fiash might be too weak and result In

urtder'eicpc^eur^.

• Th€ wall or ceilmg should 15$ $. plain, white color tor high refiectance. I! the bounce

Burlace is not white, a color cast may result in Ihe picture.

• After you take Ihe shot, it the flash e>?}osure conlirmation lamp iJoes not light, use a

larger aperture opening and try again.