User Manual

To avoid overheating and deteriorating the flash head, do not tire more than 10

stroboscopic bursts. Then allow the Gpeodlite to rest for at least 10 min.

i Stroboscopic flash is most effective with a highly reflective subject against a dark

background.

I Using a tripodf a remote switch, and external power source is recommended

i A flash output of 1/1 or 1/2 cannot be set for stroboscopic flash.

I Stroboscopic flash can be used with "buLb."

> If the number of flashes Is displayed as —, the firing will continue until the shutter is

closed or the battery runs out, The number of flashes wll be limited as shown by the

table below.

Max. Stroboscopic Flashes

FtaììftìfpìÌ'’'''-^

1 2 3 4 5 6-7 e-9

1/4

7 6 5 4 4 3 3

m 14

14 12

10 8 6 5

1/15 30 3C 30 20

1/32 eo 60 60 50 50 40

1/64 90 90 90 80 SO 70 60

1/128 100 100 100 100 100 90 SO

FtastitkiS"'—

10 11 12-14 15-19 20-50 60-199

1/4

2 2 2 2 2

T/8 4 4 4 4 4 4

1/16 8 8 8 8 S 3

1/32

20 20 20 16 16 12

1/64 so

40 40 3S 30 20

1/128 70 70 60 SO 40 40

• if the number of flashes is displayed as—, the ntaximum number of flashes wilf be a

by the table below regardless of the firing frequency,

Flash.Output

1/4 1/8 1/10 1/32 1/64 1/128

Flashes 2 4 8 12 20 40