User Manual

With manual flash and multiple Speecilifes, you can set a different flash output

for each slave unit (group).

All settings are done with the master unit.

Wireless Manual Flash with Varied Flash Output ■

I E) Zoom ir

Press the <MODE> button so that

<M> is displayed.

* •

Press the <ZOOM/'z.> button so

that <I^1E1> blinks. '

Select the flash ratio.

• Turn the <©> dial to select <At B> or

i A: E: C>, then press the <®> button.

Set the flash output.

Press the <0> button.

The slave ID < A> will blink.

for < A>, then press the button

The slave

ID < B > win blink. Turn the

dial to sat the flash output for <S >, then

dial to set the flash output for<C>, then

press the c®> button.

All the slave IDs will light.