Instruction manual

About
Wireless Flash
With multiple Canon
Speedlites having the wireless flash feature, you can
create
various lighting effects with the
same ease as using normal E-7TL II
autoflash .
The settings you input
with the 580E?C master
unit)
attached
to the camera are
also
transmitted to the slave units which
are controlled 6y the master unit via
wireless
. Thus, you need not operate the
slave units at
ail
during the shoot .
The basic wireless set-up
is illustrated below . Then elf you do is set the master
unit to <
ETTL>
and
wireless E-TTL If autoflash will be enabled
(p.34) . Note
that
with Type-A cameras prior to the
Cfl5-10 Mark 11 and EOS ELAfV
7N E/
FLAN
7N/30V/33V,
E-Tf'L
autoflash will be used instead .
Basic Wireless
Settings & Setup
1l i5m (49 .28 .)
indoors ~i
Outdoors
~ ~
10m [32 .8ft .]
J
8m (26 .2ft .) 12m (39 .4tt .)
P Any
clash exposure compensation amount, high-speed sync {FP flash},
FE lock, FE 8
amount, manual flash, and stroboscopic flash settings set with the master unit will all
he
automatically transmitted to the slave units .
a Even with rtiu[tiplr ;
Speedlies positioned as slave units, elf will be controlled
by
vrireless .
e A
SSOEX set as a slave unit can also he controlled by wireless
by Speed lite
Transmitter
ST E2
(optional) .
.
Hereinafter, the "master unit" will refer to a 580Ex se[ as the master
unit . and a
wirelessly-Cnnirofled
"slave unit" will he a 580 EH set as the slave unit .
32