Instruction manual

LXl ~ The Speedlife's zoom set[ing
will 6e set automatically to 2hmm . ]t is possible to
change
the ma8t( :r unit's zoom setting .
Wov :EVer, npte that the master unit transmits v+ireless
signals to [die slave unit(s) with :he
preflash . Therefore, the flash coverage must cover
the
slave
units position . If you change [he
master units room setting, be sure to test the
wireless oppraiion
before shouting .
u IFthe
slave unit enters auto power
off . it can 6e turned on again t~v ; pressing the master
unit's test firing button .
*
A
test flash candor 5o fired while the
camera's operation simer 64 or 66 is active .
Master
Unit's Flash ON/OFF
You can disable the master
unit from firing during actual exposure
so that only
the slave
unit(s) will fire in the final picture .
rE771 D Zoom,~'imm ~
-ori-
-~
~i i `
5%0 . 'IT
. . (~Tfl,7lTl ± ~{ 2
-o FF-
Press the
<ZOOMI'= .a button so
that the display blinks as shown
on
the left .
Disable
the
master anti's flash
tiring .
Turn the < ;a dial to select <e FF >,
then
press the
r0>
butEon .
k
The
<'M>
iron
will blink .
ETTL
IM Zoom L'imm
.-i .--
L~1 Even if you disable
the master units flash firing, it will still fire a preffash to transmit
vrirelpss signals .
36