Instruction manual

Using Fully Automatic Wireless Flash
Flash exposure compensation and other settings set with the master unit will
also tie
automatically set
in the slave units . Thus, you need not make settings
on the stave unit{s} . Wireless flash with the following settings can be done in
the same way as with normal flash shooting .
" Flash exposure compensation " FHB
" High-speed sync [FP flash] " Manual flash
" FE lock " Stroboscopic flash
Lyl Wifh FC lack . if even one Speediite will resuiE in underexposure, the <f 7 icon will blink in
the viewfinder . peen the ape rEUre mare or move the stave unit closer to the subject .
5etiing Communication
Channel
If there is another Canon wireless flash system nearby, you can change the
channel No . to prevent signal confusion . Bath the master and slave units must
be set to the same channel No .
IETTL D Zoom
2'irnm
, 7
~Ii1C,n
z .F 1
1
3
'1~-
i
---
i ~Q loom 21
7
Press the ¢ZOOMI'x, > button so
that blinks .
Set the channel No .
~ Turn the ~O.>
dial
to select the channel
number, then press the <(, ; a button-
37