User Manual

Wi-Fi Functions 173
4 Select the memory that contains the recordings you wish to
transfer wirelessly and touch [OK].
You can select more than one memory.
Touch [All files] to transfer all the recordings, or [New files] to transfer
only those recordings that have not been previously transferred.
Once connected, the wireless transfer will begin automatically.
You can touch [Stop] and then [X] to cancel the wireless transfer
while it is in progress.
5Touch [OK].
IMPORTANT
Do not open the memory card slot cover during wireless transfer.
Observe the following precautions when transferring files. Failing to do
so may interrupt the transfer and incomplete files may remain at the
transfer destination.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camera mode.
- Do not connect the optional WM-V1 Wireless Microphone.
If the file transfer is interrupted, select [New Files] and perform the file
transfer again.
If incomplete files remain at the transfer destination, check the content
and make sure they are safe to delete before deleting them.
NOTES
AVCHD movies transferred using Network Utility will be saved in the
Videos folder on the computer by default. If you start VideoBrowser
after you transfer AVCHD movies, the destination folder will automati-
cally be added to the software's Library.
MP4 movies transferred using Network Utility will be saved in the same
location as AVCHD movies. If you start ImageBrowser EX after you
transfer MP4 movies, the same destination folder will automatically be
added to ImageBrowser EX. If you change the destination folder in
Network Utility before transferring files, make the same change in the
ImageBrowser EX settings.
Depending on the wireless router's settings and capability, it can take
some time to upload video files.