Owner's Manual
Table Of Contents
- Instruction Manual
- Introduction
- Features
- Using This Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Inserting the Battery
- Attaching and Detaching the Receiver
- Turning the Receiver On
- Acquiring GPS Signals
- Geotagging Images as You Shoot
- Logging the Route Traveled
- Setting the Positioning Interval
- Using the Digital Compass
- Setting Time from GPS on the Camera
- GPS Precautions
- Provided Software
- Using a Bracket (Sold Separately)
- Specs
- Scan of CD-ROM
- Warranty
21
Using the Digital Compass
Calibrate the digital compass at the shooting location. Also cal brate the
compass if the direction shown as you shoot seems incorrect.
1
Select [GPS device settings].
On the EOS-1D X and other models
that display the following screen, set
[GPS device] to [Enable], and then
select [GPS device settings].
2
Set [Digital compass] to [Enable].
3
Select [Calibrate digital
compass].
Press <0> to prepare for calibration.
Move the camera as shown on the
next page.
Calibrating the Digital Compass