Owner's Manual
Table Of Contents
- Instruction Manual
- Introduction
- Features
- Using This Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Inserting the Battery
- Attaching and Detaching the Receiver
- Turning the Receiver On
- Acquiring GPS Signals
- Geotagging Images as You Shoot
- Logging the Route Traveled
- Setting the Positioning Interval
- Using the Digital Compass
- Setting Time from GPS on the Camera
- GPS Precautions
- Provided Software
- Using a Bracket (Sold Separately)
- Specs
- Scan of CD-ROM
- Warranty
29
All information in this manual is based on Canon testing standards.
Receiver specifications and appearance are subject to change without notice.
Specifications
Compatible cameras EOS DIGITAL cameras
* Cameras with [GPS device settings] menu item: All
features available
* Cameras without [GPS device settings] menu item:
<
LOG
> mode available
Geotagging Images Latitude, longitude, elevation, direction, time
(UTC) and signal acquisition
* GPS-compatible cameras: Can be tagged during
shooting (EOS 7D does not support tagging the
shooting direc ion)
* O her cameras: Map Utility (provided software) can
be used for geotagging, based on log information
Reception frequency 1575.42 MHz (L1 band)
Positioning Interval 1, 5, 10, 15, or 30 seconds, or
1, 2, or 5 minutes
Logging mode NMEA-0183
One file per day, based on UTC
Time adjustment Camera time can be set from GPS time data
Digital compass Triaxial geomagnetic sensor and triaxial
acceleration sensor used to calculate direction
Interface Digital terminal for connecting a dedicated
interface cable
Power Supply One AA/LR6 alkaline battery
(NiMH and Li-ion batteries supported)
Dimensions 54.3 x 72.9 x 44.2 mm / 2.1 x 2.9 x 1.7 in.
(W x H x D)
Weight Approx. 82 g / 2.89 oz.
* Excluding battery
Operating temperature 0°C to +40°C / 32°F to 104°F
Operating humidity 85% or less
Provided software ImageBrowser EX, Map Utility