Owner's Manual
Table Of Contents
- Instruction Manual
- Introduction
- Features
- Using This Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Inserting the Battery
- Attaching and Detaching the Receiver
- Turning the Receiver On
- Acquiring GPS Signals
- Geotagging Images as You Shoot
- Logging the Route Traveled
- Setting the Positioning Interval
- Using the Digital Compass
- Setting Time from GPS on the Camera
- GPS Precautions
- Provided Software
- Using a Bracket (Sold Separately)
- Specs
- Scan of CD-ROM
- Warranty
31
Safety Precautions
Do not leave the receiver inside a vehicle in hot weather or near a heat source. The
receiver may become hot and cause burns if touched.
Do not use the receiver when it is covered by or wrapped in a cloth. This may trap
heat inside, posing a risk of case deformation or fire.
Do not use paint thinner, benzene, or other organic solvents to clean the receiver.
This poses a risk of fire and may be hazardous to your health.
If you drop the receiver in water, or if water or metal objects get inside, immediately
remove the batteries. This poses a risk of fire or electric shock.
If the unit malfunctions, becomes damaged, or requires repair, contact your
dealer or a Canon Service Center.
Handle the receiver in accordance with “Handling Precautions: Camera
Care” in the camera instruction manual.
Caution
Preventing Injury or Equipment Damage
Handling Precautions