Owner's Manual
Table Of Contents
- Instruction Manual
- Compatibility
- Table of Contents
- Parts & Controls
- Installing the Batteries
- Attaching the Flash
- Flash Shooting
- Flash Shooting in Each Camera Mode
- Auto Power Off
- AF-Assist Beam
- Setting the Flash Functions by Camera Operation
- About Wireless Flash
- Wireless Settings
- Fully Automatic Wireless Flash
- Flash Ratio with E-TTL II
- Wireless Multiple Speedlite Shooting with Manual Flash Output
- Troubleshooting
- Specs
- Warranty
24
2
Set the flash ratio.
3
Take the picture.
Set the camera in the same way as with normal
flash shooting.
The flash ratio range of 8:1 - 1:1 - 1 8 is equivalent to 3:1 - 1:1 - 1 3 in stops (1/2-stop
increments).
The flash ratio under the Z mark is shown in parentheses below the scale.
(5.6:1) (2.8:1) (1.4:1) (1:1.4) (1:2.8) (1:5.6)
8:1 4:1 2:1 1:1 1:2 1:4 1:8