Owner's Manual
Table Of Contents
- Instruction Manual
- Compatibility
- Table of Contents
- Parts & Controls
- Installing the Batteries
- Attaching the Flash
- Flash Shooting
- Flash Shooting in Each Camera Mode
- Auto Power Off
- AF-Assist Beam
- Setting the Flash Functions by Camera Operation
- About Wireless Flash
- Wireless Settings
- Fully Automatic Wireless Flash
- Flash Ratio with E-TTL II
- Wireless Multiple Speedlite Shooting with Manual Flash Output
- Troubleshooting
- Specs
- Warranty
8
1 Press and hold the power button for at
least 1 second to turn on the flash.
BThe power lamp turns on and flash recycling starts.
2 Check that the <Q> lamp is lit.
When the <Q> lamp lights, you can shoot with the
flash.
See p 32 for guidelines about the flash shooting
range.
3 Take the picture.
Flash Shooting