User manual

3. Wind 5-1 /4 feet of film around the center spool moderately tight for 36
exposures .. . 3-1 /4 feet for 20 exposures .. . 3 feet for 18 exposures. Do
not touch the emulsion ( dull ) side with your fingers.
4 . To assemble the magazine, first insert the center spool into the inner shell,
with the beginning of the film sticking out of the slot .
5 . Place the center spool into the inner shell and then place it into the outer shell.
Inner and outer shell slots should be superimposed. Turn the inner shell counter-
clockwise until it clicks into the locked position .
6 When
the film magazine is properly loaded and locked, draw out the film and
trim it , as illustrated.
• This procedure must be done in a dark room or under safe lighting conditions.
• Keep the magazine in its case when loaded.
•
Keep the magazine clean always .
33