Operating instructions

F
Recording Still Images on a Memory Card [] []
You can record still images with the
Card access PHOTO button
camcorder, from a tape in the camcorder
([_ 105), or from devices connected via the
DV terminal or AV terminal ([._ 106).
H
0 Do not turn off the camcorder, disconnect the power source or remove the
memory card while the card access display (<<< or >>>) in the upper right
corner of the screen or the card access indicator is flashing Doing so could
resuk in data damage
0 When you are using a SD Memory Card, make sure that the protect switch is
set to allow recording.
Make sure to insert a memory card with enough remaining capacity
m
.$
1. Set the camcorder to CARD CAMERA mode.
The remaining image capacity and other information appear
2. Press the PHOTO button halfway.
• 0 flashes in white and turns green when focus is adjusted
• Exposure is locked
• When you pressthe PHOTO button on the wireless controller,
recording starts immediately.
3. Press the PHOTO button fully.
• YOUhear a shutter sound, and the screen appears as if a
shutter has been released
• The card access indicator flashes
• The still image shown on the screen will be recorded on the memory card.
TOuse the self-timer ([-[_170), press the _ (self-timer) button before step 2 and
press the PHOTO button fully