Operating instructions
You can record images from devices connected via the S-video terminal or AV terminal
(analog line-in function), or via the DV terminal as still images on a memory card.
H When recording via the AV terminal, make sure that "AV,_ DV" is dBplayed on
the screen When recording via the DV terminal, make sure that "AV,_ DV" is
not displayed Change the setting as necessary ([_:_ 93)
m
.E
2 IIL
1. Connect the camcorder to the video device.
• S-video/AV terminak SeePlaying Back on a TVScreen (_ 41)
• DV terminal: See Connecting a Digital Video Device (_ 88).
2. Set the camcorder to PLAY (VCR) mode.
If a cassette is loaded, make sure the tape is stopped
3. Connected device: Load a recorded cassette and play back the tape.
4, Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining _magecapacity and other information appear.
• When you pressthe PHOTO button on the wireless controller, recording starts
immediately
5. Press the PHOTO button fully.
• The card access indicatorflashes
• The still image shown on the screen will be recorded on the memory card
O A still _mage recorded from an image in 16:9 format will be vertically
compressed
O The data code of the still image will reflect the date and time it has been
recorded on the memory card
O There will be no shutter sound in PLAY (VCR) mode
O The image size of a still image recorded from other video devices will be
640 x 480
106