Operating instructions

_n'_rdRecordingMotionJPEGMoviesonaMemoryCard[] []
You can record Motion JPEGmovies with the camcorder, from a tape in the camcorder
([Z[]3110), or from devices connected via the AV terminal (analog line-in) or the DV
terminal(L_ 110).
H
O Do not turn off the camcorder, disconnect the power source or remove the
memory card while the card access display (<<< or >>>) in the upper right
corner of the screen or the card access indicator isflashing Doing so could
result in data damage
O When you are using a SD Memory Card, make sure that the protect switch _s
set to allow recording.
O Do not load/unload a cassette during recording
O Make sure to insert a memory card with enough remaining capacity
O The sound of a movie recorded on a memory card will be monaural
Recording _ith the Cam_;_rd_r
; ? a a _
1. Set the camcorder to CARD CAMERA mode.
2. Press the start/stop button to begin recording.
YOUcan _cord up to 10 seconds in 320 x 240 and up to 30
seconds in 160 x t20
3. Press the start/stop button to stop recording.
The camcorder starts writing the movie on the memory card
To use the self-timel; press the _ (self-timer) button before step 2 ([.]3 70) and
press the start/stop button
m
°m
o
&
]09