Operating instructions

Playing Back a Memory Card [] []

You can play back memory card images on the LCD screen, viewfinder screen, or on a

connected _ screen (see Playing Back on a TV Screen (_ 41) )

You can display a single image (single image display [[]3 111), 6 at one time (index

screen _ 112), or one after another (slide show _ 112). Use the Card Jump function

to quickly locate an image without displaying them one by one ([_1 113)

H O Images not recorded with this camcorder, uploaded from a computer (except

the sample images [_3 132), edited on a computer and images whose file

names have been changed may not be played back correctly

O Still images not recorded with this camcorder may not be printed correctly on a

Rubble Jet Printer with direct print function.

O Do not turn off the camcorder, disconnect the power source or remove the

memory card while the card access display (<<<) in the upper right corner of

the screen or the card access indicator is flashing Doing so could result in data

damage

O Make sure to insert a memory card that contains images.

O Only date and time will be displayed when pressing the DATA CODE button

O You can enlarge still images by 2 times during playback ([_3 82)

Si_g!_ Jm_g_ Dis_!_y,

1. Set the camcorder to CARD PlAY (VCR) mode.

• The last recorded image appears

• _ Movies are displayed with the first scene as a still image indicated by

"l_fl I"

2. Press the CARD+/- button to move between images.

Pressthe CARD + button to display the next image and the

CARD - button to display the previous _mage.

3. _ To play back a movie, press the I_/11 button.

The lastscene appears as a still image when playback is

complete.

°m

111