Operating instructions

Memory Card Information
tmages recorded on a memory card with this camcorder can be transferred to a
computer using the following products for SD Memory Cards or MuitiMediaCards:
PCCard Adapter: An adapter to insert a memory card into the card slot on the
computer.
USBReaderNVriter: Connects to the USBport of a computer for direct accessto the
memory card.
FD Adapter: An adapter to insert a memory card into the floppy disk drive on
the computer.
Memory Cards that are confirmed to operate with this camcorder
(as of January 2003):
SD Memory Card: Panasonic: 16 MS, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB
SanDisk: 16 MB, 32 MB, 64 MB
MultiMediaCard: SanDisk: 16 MB, 32 MB, 64 MB
However, we cannot guarantee that all of these memory cards work properly.
M_m_ry ¢_rd Handling Rre_;_i_ns ..............
O Format new memory cards with the camcorder. Memory cards formatted with
other devices such as a computer may not operate correctty.
C) We recommend saving backups of memory card images on your computer's hard
drive or other external memory device, tmage data may be corrupted or lost due to
memory card defects or exposure to static electridty. Canon Inc. makes no
warranties for corrupted or lost data.
O Do not turn off the camcorder, disconnect the power source or remove the memory
card while the card access indicator is flashing.
O Do not use memory cards in places subject to strong magnetic fields.
O Do not leave memory cards in places subject to high humidity and high _
gtemperature
O DO not disassemble memory cards, __I_
O Do not bend, drop, or subject memory cards to shocks and do not expose them to U
o
water, _,
O Moving a memory card rapidly between hot and cold temperatures may cause
condensation to form on its external and internal surfaces If condensation forms a.
on the card, put it aside until the droplets have evaporated completely.
O Do not touch or expose the terminals to dust or dirt.
O Store and carry memory cards in the supplied case to protect the terminals.
O Check the direction before inserting the memory card. Forcing a memory card
backwards into the slot may damage the memory card or the camcorder,
O Do not remove the label from the memory card, or affix other labels on the
memory card. if you wish to add labels, affix them to the case. ] 3 ]