Operating instructions

2. Turn the selector dial to select [SYSTEM] and press

the selector dial.

3. Turn the selector dial to select [D/TIME SET] and

press the selector dial.

The year display starts to flash.

4. Turn the selector dial to select the year, and press the selector dial.

• The next part of the display starts flashing.

• Set the month, day, hours and minutes in the same way.

5. Press the MENU button to close the menu and to

start the clock.

Time zone, date and time appear for 4 seconds each time you

turn the power on

0 To change a part of the date or time, press the selector dial at step 4, and

move to the part you wish to change

O The date can be set to any year between 2003 and 2030. _ at

DisplayjngDateand Timeduring Recording ........................ __

You can display time zone, date and time in the lower left corner of the screen (the

time zone disappears after 4 seconds).The 4-second display will no longer appear

when you turn the power on, The date and time display will nor be superimposed on

your recordings.

1. Press the MENU button to open the menu.

2. Turn the selector dial to select [DISPLAYSET UP] and

press the selector dial.

3. Turn the selector dial to select [D/T DISPLAY]and

press the selector dial.

4. Turn the selector dial to select [ON].

5. Pressthe MENU button to close the menu.